Excellent Results On Bare Or Sealed Wood
7 Consistent Colour Shades
Formulated to offer excellent results on bare or sealed wood, Fiddes Supreme Wax Polish contains a unique, environmentally friendly blend of waxes that naturally enhances the beauty of your wood.
Available in seven carefully selected shades, the Supreme Wax range exhibits significant advantages over many traditional toluene based wax polishes. Supreme Wax is virtually odour free, easy to apply, and once buffed to the desired sheen level, provides a depth of finish that revives and protects any original patina.
Sand the wooden substrate in stages, working with a medium sandpaper (120 grit), through to a medium / fine grade (180 220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Supreme Wax. Take care to remove all traces of sanding dust and test the chosen Fiddes Supreme Wax shade on a similar substrate to verify the colour. A coat of Fiddes Shellac Sealer is recommended on open grained woods prior to application.
Take a clean cotton cloth, sponge or brush and apply in the direction of the wood grain where possible. To obtain a uniform colour, always wipe evenly, blending the Supreme Wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Supreme Wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern.
Leave to dry for around 3 minutes, and buff to finish with a soft cloth.
The application of additional coats will deepen the existing colour / shade and significantly enhance the resulting sheen level.
Cloth, Brush, Sponge.
3 minutes at room temperature.
16 sqm per Litre (depending on substrate and method of application)
1 coat further coats will deepen colour / shade and enhance sheen level
RECOMMENDED FOR USE ON
Fine Furniture, Doors, Floors, Cabinet Work and Panelling